What Is Secondary Glazing?
Secondary glazing is a cost-effective method to increase the efficiency of thermal energy and reduce noise of single-glazed windows that are already in use. In contrast to replacement primary windows it doesn't require removal of frames from the existing ones and is more sympathetic to period properties.
A good company should be able to provide the support you need after installation, including a courtesy call after a week or so to ask how you're getting on. They should also be FENSA accredited and provide an assurance on their products.
The efficiency of the heating system can be improved.
The addition of secondary glazing can help to reduce the loss of heat and also eliminate drafts. It can also make your home more comfortable and peaceful. However, it is important to know that this type of solution isn't an alternative for triple or double glazing. It will only provide an improvement in energy efficiency.
Glass is not the best insulator but a layer of air or sometimes argon gas between two panes glass can slow down the transfer of heat from cold to warm and also reduce condensation. A layer of insulation between the two panes of glass in a double-glazed window will stop cold air from entering your home and keep warm air in your property.
There are a wide range of options available, some of which are designed to be installed as a DIY kit, others need professional installation. There are systems that can be fitted to sliding sash windows as well as other frames that are pre-existing, some that slide open or close, and others that are fixed to the wall.
The most cost effective secondary glazing option is the 'lift out' system that is installed inside your existing window and simply lifts out of a secured channel. This is the best option for sash window or if access to primary windows is restricted.
Certain systems provide more insulation than others based on the type of glass and the gap between the primary and secondary window. The greater the gap between two panes of glass the more efficient the thermal performance will be.
In some cases the addition of secondary glazing can increase the thermal efficiency of a home to a point that it is comparable to the insulation offered by the newer double or even triple glazed windows. This is especially applicable to older homes, where planning restrictions limit the kind of replacement window that can be put in place. In these cases the use of secondary glazing to insulate the windows that were sash-based may be the only option that is cost effective.
Reduced noise
Windows allow a significant amount of noise to enter a home. This is a particular problem for those who live near rail lines. In these cases upgrading to double glazing will reduce the impact external noise can have on a home. However, not everyone wants to or is able to afford the change of all their windows. This is the point where secondary glazing is required. This is when you add an additional window to the frame of a property. This second window will provide an additional (sealed), barrier to help protect your home from cold air, as well as external noise.
Noise pollution is a serious issue that can have a long-term impact on your health if you do not address it. Fortunately, Ecoease offers a low-cost solution to help reduce the amount of outside noise that could get into your home. Our second double glazing is a fantastic alternative for those looking to reduce noise pollution, but without spending an enormous amount to replace their windows.
The primary benefit of secondary glass is that it creates a barrier between your house, and the outside world. This helps reduce noise pollution. This is achieved by installing an additional frame and pane within the original window with a gap of approximately 100mm. The secondary window is able to be closed and opened for ventilation, unlike the primary window.
This additional barrier also helps to shield the space from cold air that would otherwise escape through the original window and then down the wall. This helps to keep the room warm and also cuts down on energy costs.
Additionally the secondary glazing also helps to reduce the level of noise generated by traffic and other external activities. The extra barrier between your home and the outside world could be a significant comfort benefit and will bring a significant change to your daily life.
Another benefit of the system is that it can be adapted to almost any type of window, including windows that awning and vertical sliding sash windows and even sliding doors. It can be fitted to individual windows or to multiple windows in a house and is a far more cost-effective alternative than changing all your existing windows. It also maintains the appearance of your home and can be a more sympathetic solution for listed buildings where changing windows could compromise their appearance.
Increased security
Double glazing is typically considered to be a costly alternative. This is not always the case. It is possible to purchase secondary glazing for a lot less than you might think, especially if you consider that it is an effective security measure. In addition to offering insulation, it also acts as a second security measure that would be difficult for burglars to get into. Installing secondary glazing is a better choice than replacing windows which can be difficult in some instances and require permission for planning.
Contrary to windows that can be made to suit any type of home, secondary glazing is designed to fit on the inside of your existing window frames. It's a simple and cost-effective option that can offer several advantages. Additionally it can enhance your property's overall security by decreasing the amount of noise that can enter your home.
If you are looking for secondary glazing in your area, you should take into consideration the quality of the product and the services provided by the installers. Check their certifications, insurance documents and warranties. You should also look at how long they have been in business. Experienced companies will ensure that the job is done efficiently and in a timely manner.
Secondary glazing has the primary benefit of cutting down on heat loss and improving draught proofing by creating another window behind the existing windows. The second pane functions as an insulation layer that reduces heat loss and cuts down on noise intrusion. This is a cost-effective method to upgrade your windows without replacing them.
If you live in an older home with single-glazed windows, then you're likely to spend an enormous amount of money for cooling and heating. This is due to the fact that glass is an excellent conductor of heat, which means that your hot water and electricity are lost through your windows as you're trying to stay warm in the winter.
The best solution to tackle this issue is to invest in secondary glazing. This kind of window treatment is much cheaper than installing new window units and provide you with a variety of advantages, such as improved insulation, less energy costs and increased security. You can also pick from a wide range of styles, including hinged units and lift-out secondary glazing.
Improved appearance
One of the main concerns of homeowners is the impact that replacing their windows would affect the appearance of their home. It is possible to achieve the efficiency of thermal double glazing without affecting the appearance by installing secondary glass instead. double glazing companies near me is a much simpler affair than replacing the windows that were originally installed and can be completed much faster, too.
The process involves an individual frame and pane that are positioned on the inside of the existing window, usually leaving a gap of approximately 100mm between them. This serves as an obstacle to heat loss and the seals made of rubber aid in separating the window from the space and reduce the transmission of sound. It can also be used to increase the insulation of period buildings in areas where planning restrictions prevent the use of double-glazed units.
There are a variety of styles of secondary glass available to meet your needs. They range from glass that can open like windows to those that are fixed to frames for sash. Some secondary glazing systems are designed to be as discreet as they can with frames that are completely hidden and are unobtrusive from the inside. These are great when regular ventilation is required, as opening the sash can create an health and safety risk.
Some companies can offer permanent aluminium secondary glazing which is positioned on the exterior of your current window, resulting in more energy efficiency and a modern appearance. This is a good solution for listed or historic buildings. It is also economical if you are on a tight budget. You can choose a woodgrain and colour to match the house to make it appear as if it's always been there.
Whatever kind of secondary glazing you choose It is crucial to choose a business that has experience of working in your particular type of building and has a good reputation for customer service. You can also check online reviews and seek recommendations from your family and friends. Check if the business is registered with professional organizations, such as the Glass and Glazing Federation.